Deck Dolly for John Deere 1025R 2020 model year and newer tractors with a 7 Iron style rear deck mounts. This design is a hybrid between the 7 Iron dolly for the rear mounts and the Universal dolly for the top or front mounts. Fits all size decks and may fit others that have the same dimensions for factory hook ups. With built-in adjust-ability, it is sure to fit your deck perfectly. See pictures to see if your deck matches. The rear mounts must be approximately 16" inside to inside as shown. If yours is different send me an email.

Please be sure your deck's rear mounts look like the pictures. If not and you have a bracket welded on the deck shaped like a C to accept a shaft then you have the old style and need the 2019 and older model.

This dolly features 2-7" wheels. It also features the 5' long legs. Soft Surface Feet, Longer 6' Legs and Dual Wheels are available as options. See pictures. As the draft arms stay in place on these decks I highly recommend the longer legs due to the draft arms encroaching the lifting position.

Quit struggling with that mower deck and get the Deck Dolly to make transportation, maintenance and storage a snap. Easy hookups along with light weight make this a must have accessory for your shop.

Please note that these decks have a breather on the gearbox and it is possible that the breather could seep grease due to the way the deck hangs on the Deck Dolly. To remedy, simply replace the breather with an 1/8" pipe plug from your local hardware store if this occurs.

Take a look at the videos below for operation and assembly. This Dolly is a little different but the same principles apply.

Just take a look at this videoi to see how easy it is!! 

For assembly video instructions click here.

For assembly manual click here.