Universal Deck Dolly for any and all mower decks.

Great product. Easy to assemble and use. Makes working on deck easy and helps take up less space when storing the deck.

At this juncture… will attest to the easy assy. Foremost its assy is surely due to the precise engineering specs and detail to the assorted assy points. Mainly noting the very welcomed specific drillings and connection tolerances that should provide yrs of unencumbered usage. We have at present 2 diff JD decks, a 2038R 60D Autoconnect Mid-mount 7-iron MY17 and a X739 54D High Cap Autoconnect. Whereby currently have applied only to the 60D. Discovered that due to its config the dolly handle width in its min and max spread of the cross support bar wouldnt allow center fitting. Thus had to mount it about 6" off to the autoconnect drive side to allow all 4 brackets to be secured under each part of the deck for lifting. Yet with that it did allow adequate lifting. Only other minor thought.... was when the deck is disconnected from the tractor the back side ends up flat against the ground...thus required hand lifting each side and placing a small block under to hold it up off the ground enough to allow the dolly mount brackets to go under the deck. Likely when applying to the 54D addl adjustments as provided throughout the design will be necessary to fit it to that design. Will be doing that next week. As for the 60D, definitely adding the dual wheels and the longer arms were a must to lift the 325# deck. And because we store the 60D on a pallet .... this certainly has provided a benefit in being able to place it easily on and off.

I have a 2021 Yanmar SA 424 DHX tractor with a Yanmar M60 mid mount mower the Universal Deck Doll provides easy access for maintaining and storing my mower deck and it fit perfect. Rugged design well built and customer service is Great quick to respond to emails and phone calls!

Purchased this for a Kubota BX25D 60" deck. Painless assembly and immediately put to the test. Nothing being in the way of removing the blades made things a lot easier. Reduced storage footprint by 66%. This device should be on the shelves of every home and garden store coast to coast.

Just received my dolly today. After a painless assembly I put it right to work. This thing is an absolute necessity and should be on the shelves of every lawn and garden center coast to coast. Thanks for this wonderful innovation.

Worked wonderful....don’t know how I got along without it!

This product seems sturdy and capable of lifting and moving my Kubota 60 inch mower deck. It makes sharpening and servicing easy as well. I like being able to store the deck over the winter in a way that is both easy to move and takes up less space.

When I first received the deck dolly I unpacked the box and I have to say everything was well packed. The instructions were fairly clear and I started putting it together. The main snag/problem I ran into was the axle for the double wheels. It is made out of all thread and the pieces were cut to length. I had a problem getting the nuts supplied to thread onto the axle. After filing some small burrs on them I was able to get the nuts to work. I just used it today for the first time and it was fairly easy to use. I have a Kubota BX 2670 and the drive over deck is very heavy. I had to use a pry bar to lift the deck for the bottom and top brackets to fit under the deck. Once clamped down It was very easy to pick up the deck and move it out of the way. It will be nice storing the deck up off of the ground as my shed does not have a concrete floor. I would recommend this product.

Removed deck for first time today to check blades. Dolly worked very well but takes quite a bit of lift effort.